Psconfig exe - cmd

It has 4 configuration steps. If errors occur or the command does not complete successfully the following script can be used. This will remove the app pools and IIS sites. It will also delete any custom changes that you have made to your web. It may also. That is why this step should only be used when nothing else works.

Example of the basic command failing. If the basic upgrade command fails as seen below. You can try to track down the issue through the logs but usually running the longer command with 7 steps will succeed. Performing configuration task 3 of 4. Failed to connect to the existing server farm located at the specified database server and database name. The database name is not a valid configuration database. Hi Emaborsa, I cannot open the first link you pasted — get an access denied.

Anyway: analyzing the installer log should tell what is causing the issue. If you have problems to resolve it I would recommend to open a ticket with Microsoft support. After more than one month I decided to set up another server to replace the faulty server and kick it out from the farm. Everything done using powershell, since the wizard blocks any configuration due the missing package. I opened a Microsoft ticket, but after one month with no result, I decided to set up a new server, added it to the farm using powershell commands and removing the old one.

Now everything is working. Hope you are doing good. We have a multiple sharepoint on prem environments which get patched every month. While running psconfig. Also, it is observed that psconfig GUI takes more than an hour to complete per server despite we upgrading all the content databases before running psconfig. Hi Prathamesh, sounds as if this requires a deeper analysis. If you need assistance to get this analyzed I would suggest to open a support case with Microsoft.

Hi Stefan, I have updated latest security patch yesterday in sharepoint non production server only. In few servers it updated fine and in 2 servers failed 1 web front and another web applciation.

Could you please share me the correct steps to follow for security patch update. I think onlty restore of vm is another option 3 Please guide us. Hi Siva, about the web. PSConfig should update it correctly afterwards. About the other issues: from the symptoms it is not possible to decide what went wrong. My suggestion would be to review the installer logs and if you cannot find out what went wrong opening a ticket with Microsoft would be advised.

The second run of psconfig works, even though memory also climbs to over 8 or 9 GB on a 12GB server. Tried something different… I set the affinity to 1 processor. For some reason this worked. You can confirm affinity is set to 1 by opening taskmgr after running the above commands, going to details, right-click PSCONFIG, set affinity, you should see it set to only 1 proc. Exception: No root site specified.

How to resolve this. Still no fix from MS on our memory leak problem, which is the same problem Prathamesh described, despite providing a ton of logs, procdumps, and other troubleshooting data. Our only solution is to use psconfigUI or setting affinity to 1 processor.

With psconfig and PS remoting, automation is pretty simple, but currently, we have to manually run the GUI on each server in the farm due to the memory leak with psconfig, and still no fix from MS. Just a quick question for optimizing the patch process.

Running this 1 at a time takes a long time for huge farms. Hi Stefen, Currently we are facing issues as reported in the below blog in our SP farm when we run the configuration wizard using psconfig. We use the powershell command and not the GUI for all our farms and the command we use is below. So could you please check and let us know if you aware of the issue and guide us on the change we need to make for our patching process?

Command: psconfig -cmd helpcollections -installall -cmd secureresources -cmd services -install -cmd installfeatures -cmd applicationcontent -install -cmd upgrade -inplace b2b -force -wait.

The recommended patching method would be zero downtime patching which would ensure that there is no downtime involved in running psconfig which would reduce the impact of a long running PSConfig operation. Hi Stefan, Thanks for your reply.

Yes, we use Zero downtime patching method only and we have less than 10 Web application in our farm right now. We noticed the Search Crawling running during the same time as we patch and affects the psconfig. We will stop the search crawling and test the psconfig next time. We will let you know if that works. We have a case open with MS regarding the longer psconfg times on SP compared to SP and they have been able to repro.

Hi Stefan, I am running psconfigui on my sharepoint server which hosting the central administration after installing october CU patches.

The configuration wizard running for more then 4 hours.. Should i wait or i should cancel it? Please help. This site uses Akismet to reduce spam. Learn how your comment data is processed. Skip to content. In this case you should at least run the following powershell command after installing the fix to ensure that all application content files are updated: Install-SPApplicationContent More details about this command can be found here.

In summary, you should definitely apply a CU in a QA environment first, test your critical business functionality, take a backup of Production, then apply the CU once you have tested in QA and been reassured there are no major regressions. I personally prefer to use the GUI-based SharePoint Products Configuration Wizard when updating a farm, as it has more built-in intelligence to know what actions to perform more of a click Next, Next, Next experience , but you may prefer to use the command line tool.

Also note that regardless of which option you choose, the process needs to be run on each server in the SharePoint farm. Sign up to join this community. The best answers are voted up and rise to the top. Stack Overflow for Teams — Collaborate and share knowledge with a private group.

Create a free Team What is Teams? Learn more. What are the PSConfig. Ask Question. Asked 9 years ago. Active 9 years ago. Viewed 22k times. Here is the command: PSConfig. If you fixed the problem, please help. Healthy new years. An exception of type Microsoft. Create a new web application with existing content database copy in same sharepoint farm.

One users can't edit an excel file on Point whereas the whole team can. SharePoint : Drag and drop keeps document in Checked out state, despite no mandatory properties. Hi Guru, Sharepoint Where do I troubleshoot? Skip to main content. Find threads, tags, and users Can anyone please help troubleshoot the following error? This failed with the following message: Exception: Specified argument was out of the range of valid values.

Parameter name: sLine EventID:an59t The only recommendations I can find by searching leads me to believe that I may need to dismount the content database and mount it again Has anyone seen this error before? Any ideas for troubleshooting? Thanks in advance!