Pfc setup

Note that this service is completly contained in this project i. A light weight Flask Data API has been created under the upload-file-service for getting a list of machines seen, their latest readings, and the ability to download data over a span of time in CSV format.

A simple ReactJS front end has been included in the upload-file-service docker image to access the information available from the DataAPI. If you point a browser to your host machine's port 80, it will load up. In order to use this backend with PFCs, you need to run a modified version of the openag-device-software code.

So, you'll want to set it to something like:. At this point, you're ready to run the software on your PFCs. If you're running balena, you can push the firmware up through it's command line interface, or if you're deployed the code directly onto your RaspberryPi computer, you'll want to restart the device software on the machine. Once you've got the docker-compose setup running. You can go to Chronograph on you server's prot To make things simple, copy and paste the following startup scripts to the servers and switches and modify if required.

In case you cross routers, make sure that the priority is being mapped from one subnet, to the other subnet on the other VLAN.

Make sure the CNP packet are being sent, check the counters on the servers, and see the actual CNP packet on wireshark.

Contact support. But if it is less sensitive in the centre flatter it has to be more sensitive in the extremes steeper to allow full deflection to still be attained. FS's own sensitivity doesn't operate in the same way. In that case it probably isn't providing the same level of resolution as the PFC connection. Some small amount of jitter is qite normal, though it shouldn't be much. Variations in temperature and other factors cause the resistance through potentiomenter coils to change slightly, so any system measuring it with any accuracy will usually see some variation.

If you have a lot, you need assistance from PFC or your suppliers, though, not from software. Maybe there's a problem with the controller card in the throttle system, or possibly it has an inadequate power supply? You can post now and register later.

If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible. Example of how to add an 8 channel Digital Output module:. Note: Make sure that all digital channels have 'Nr' set. This is the 0-based bit-number that the channel is mapped to; Having several channels mapped to the same bit will cause problems.

You can mix and match inputs and outputs as required by the module. This will open up a web browser with some search results.